Posts Tagged ‘Photography’F-Stop Definition
|
|
Focal Length |
Aperture |
F-Stop |
Conclusion |
|
200 mm |
50 mm |
F/4 |
Bigger lens opening results in smaller F-Stops More light enters when F-Stop is small |
|
200 mm |
25 mm |
F/8 |
Smaller lens opening results in bigger F-Stops Less light enters when F-Stop is large |
Change in f number has a very high impact on the image captured. You can actually blur out the unwanted object from your scene and still be able to get a sharp focus of your subject. This impact of changing f number is basically termed as “Depth of Field”. Pictures captured with a low f-number will tend to have your subject in sharp focus while leaving rest of the scene out of focus. This is often used in portrait photography or macro photography where the subject is given importance than the background. Following is a range of pictures of same object with different f-Numbers; see how a change in f-number has an impact over the projected scene:
|
f-Number |
Image |
Observation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With an increase in f-Number the lens opening decreases; allowing less light to travel to the image sensor. Also with an increase in f-Number narrow depth of field is achieved.
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aperture, Aperture Priority, Choosing DSLR, Depth Of Field, DOF, DSLR, f-number, f-stops, f/11, f/2.8, f/4, f/8, Focal Length, Image Sensor, Lens, narrow depth of field, Photography, Shallow Depth-of-field
Posted in: Photography , f-stop | 1 Comment »
In my last post “Choosing a DSLR (Part-I)” I explained one of the 5 steps that I would recommend to choose a DSLR. In this post I’ll emphasize on the remaining steps.
Aperture Aperture Priority Auto Mode Camera Choosing DSLR Dark Depth Of Field DOF DSLR Dust Reduction EXIF Exposure f-stops f/2 f/2.8 f/4 f/8 f/11 Focal Length Grain Image Sensor iris ISO Landsacpe LCD Lens Live View Macro motion Night No Flash Zone Noise Photographic Film Photography Point-and-shoot Programmed Mode Protrait Shallow Depth-of-field Shooting Modes Shutter Shutter Lag Shutter Priority sports Stationary tripod
WP Cumulus Flash tag cloud by Roy Tanck requires Flash Player 9 or better.
In the previous step I only stated the feature that you will be looking in your new DSLR. Let me brief out the features along with some common specifications.
1.1. Image Stability- One of the most important features you will like to have in your DSLR. This feature is required in almost all the available scenarios and comes in two ways these days; one integrated with in the camera body and other in the lenses. When activated minor tremble to the camera will be eliminated resulting in sharper, crispier images even in the darker conditions. Some manufacturers term it as “Vibration Reduction” and some call it “Image Stabilization” but both means the same.
1.2. Sensor Size- Basically larger sensors capture even a finest detail of your subject. Digital cameras use an array of sensors containing millions of tiny pixels which constitute to your final image. Each pixel contains a bucket like structure called “photosites”. When you press the shutter release button the light rays coming from camera’s lens is poured in to these photosites and once your camera completes the exposure, these photosites are sealed. These photosites are then internally processed to apply true colors using filters.
Although understanding these sensors is a big chapter and might occupy two three posts of mine but I tried my best to brief out in a layman’s terms.
A camera that has large sensor will try to grab more of these light particles and thus fill in more of those photosites resulting in attaining a great detail of the subject. Following are some common sensor sizes available:
| Sensor Type |
Width (mm) |
Height (mm) |
Aspect Ratio |
| 1/3.6″ |
4.000 |
3.000 |
4:03 |
| 1/2.3″ |
6.160 |
4.620 |
4:03 |
| 1/2″ |
6.400 |
4.800 |
4:03 |
| 1/1.8″ |
7.176 |
5.319 |
4:03 |
| 2/3″ |
8.800 |
6.600 |
4:03 |
| 1″ |
12.800 |
9.600 |
4:03 |
| 4/3″ |
18.000 |
13.500 |
4:03 |
| 1.8″ |
23.700 |
15.700 |
3:02 |
| 35 mm (film) |
36.000 |
24.000 |
3:02 |
Sensor size Examples:
| Camera | Model |
Width (mm) |
Height (mm) |
Aspect Ratio |
| Nikon | D90, D80 |
23.700 |
15.700 |
3:02 |
| Canon | EOS 450D / Digital Rebel Xsi |
22.200 |
14.800 |
3:02 |
1.1. Burst Or Continuous Shooting Mode- As the name suggests, this feature will allow you to take a burst of images while pressing down the shutter release button. This helps in capturing sports actions or a fast moving subject like a racing car, your quick pet and of course kids. This is generally indicated as “Frames per Second”. Most of the DSLR these days are capable of capturing full resolution images at a rate of 3.5 Frames per Second. You can look for more if your budget allows you to do.
1.2. Larger Buffer- When you shoot images in burst/ continuous mode, your camera process the images and store them temporarily in its buffer memory. You must see if the buffer memory is enough to store the images captured in a burst/continuous mode. If at all your cameras buffer in not large enough to hold the images, it will automatically decrease the rate of frames per second at which the picture is expected to be taken.
1.3. Built in dust reduction- Since a DSLR has a capability to change lenses; you will more often mount/ unmount lenses based on the shooting requirements. This will expose your camera’s expensive optics to expose the risk of getting dust particles. Once dust particles stick on the image sensor or on any inner optics, it is very difficult and risky to clean. It will require professional of a good experience to clean the same.
Basically there is a vibration mechanism which removes the dust particles from camera’s optics and most of the DSLRs these days have an inbuilt dust removal/ reduction system installed. You get an option to choose it to activate or deactivate. My camera gives me an option to dust removal during startup and or shutting down the camera.
Ok, now that you know what category or categories you are going to be in, you are ready to set your budget. Buying DSLR doesn’t only mean buying one product it means you are going to buy a list of items to make up your photo gear. If you are upgrading from a point-n-shoot then you are not going to end up buying camera alone instead you may have to buy a variety of lenses based on the shooting requirements, filters, tripod, monopod, external flash unit, remote shutter release, reflectors, additional battery, memory cards, etc. So split your total budget into two parts, one for buying the camera body and another for buying its initial accessories.
Suppose you are an entry level to a mid level photographer and your goal is not to out reach your limits beyond 1500 USD. Divide it into two parts; let’s say you keep 800 USD for Camera body and remaining 700 USD for its accessories. Generally you will get a good deal when you buy camera body along with an initial lens this will act as a bonus for you and you might save a couple hundred dollars. Here your budget for buying a camera body will be 800 USD.
Write down your first budget part and proceed to next step.
You are now ready to do a research on what models are available in market that suits your requirements and budget. For this you don’t have to step out yet, just visit some good consumer websites like:
You can prepare a comparison chart based on your feature requirements you gathered in above steps. I am going to give you an example below and you can also download a template which you can fill in to make your final decision:
| Feature |
Nikon D90 |
Canon EOS 450D / Digital Rebel XSi |
| Price Body Only |
close to 1000 USD |
under 700 USD |
| Price 18-200 mm lens |
Close to 650 USD |
Close to 450 USD |
| Sensor Size |
23.6 x 15.8 mm CMOS |
22.2 x 14.8 mm CMOS |
| Mega Pixels |
12.3 million effective pixels |
12.2 million effective pixels |
| Image Sizes |
4288 x 2848 |
4272 x 2848 |
| ISO |
ISO 200- 3200 |
ISO 100- 1600 |
| Dust Reduction |
Yes |
Yes |
| Built in Flash |
Yes |
Yes |
| Continuous |
4.5 fps |
3.5 fps |
| White Balance |
Auto, 6 presets, |
Auto, |
| LCD |
3.0″ TFT LCD |
3.0″ TFT LCD |
| Dimensions |
132 x 103 x 77 mm (5.2 x 4.1 x 3.0 in) |
129 x 98 x 62 mm (5.1 x 3.9 x 2.4 in) |
| Weight |
620 g (1.4 lb) |
475 g (1.0 lb) |
| Live View |
Yes |
Yes |
| Movie Mode |
Yes |
No |
| Autofocus |
11 area TTL |
9 point CMOS sensor |
| Viewfinder Frame Coverage |
96% Frame Coverage |
95% Frame Coverage |
Wow! You are now at the very last step of finalizing your DSLR. Until now you have a shortlist of DSLRs that fit into your requirements and budget. Not you have all the arms and ammunitions to fight with all those greedy dealers who just want to sell their product no matters how worst it is.
Visit your nearest store where you can locate the shortlisted DSLRs, hold the models, look and ask any type of questions from the sales man. I am sure he/ she will get frustrated with the amount of questions and counter question you ask but it is their duty and they are being paid for this job.
Don’t buy from the very first store, just bargain the price and get out of the store without making any deal. Visit a couple of other stores and gather the best prices offered. This way you will have a chance to feel the camera and each time you hold, you will see a new point that will raise a question.
Finally sit under a tree or grab a coffee at Starbucks and compare the deals you are getting from an online dealer and that from your local dealer. In countries like US and Canada you can easily do online shopping without any risk of losing your money in fact 80-90% shopping is done online in these countries. Anyways, it all depends upon ones discretion.
Well; I don’t think you need me anymore J Go and do your homework before doing DSLR shopping. I am sure if you follow these guidelines you will surely gain something.
I my further posts I’ll try to come up with top 10 DSLRs based on the reviews and study I do.
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aspect Ratio, Auto Focus, Burst Mode, Camera Buffer, Choosing DSLR, Compare DSLR, Continuous Mode, DSLR, DSLR Buffer, Dust Reduction, Flash, FPS, Frames Per Second, Image Sensor, Image Sensor Size, Image Stability, Large Buffer, LCD, Live View, Photography, Photosites, Pixels, Sensor Type, Vibration Reduction, Viefinder
Posted in: Choosing a DSLR , Photography | No Comments »
What DSLR should I buy? Is there an effective way to choose between different available DSLRs? Which one is the best DSLR in market these days? these are very common questions that I often get from my friends and readers, I thought why not scripting it for all my dear ones- It’s a good idea I guess
If you are in one of your initial phases of research and you still have doubts whether or not to upgrade your gears to DSLR then I would like to recommend you to read my post “Is it worth upgrading to DSLR?” Believe me you will not lose anything by reading it.
OK, now that you have made up your mind to buy a DSLR; let me take you through a range of steps that I usually recommend to make decision in choosing a good DSLR.
According to me a good DSLR is not the one which is expensive or has all the advanced features or has a live view or light weight but it is a camera that serves you with what you expect after paying thousands of dollars.
Just grab a pen and a paper and write down your own conclusions as against the 5 steps that I am presenting below:
1. What type of photography are you going to do?
2. Getting familiar with important features.
3. What’s your budget?
4. Compare and shortlist.
5. Step out to analyze.
Walla!! You are done. That sounds easy right??
Now let me dig into each of the steps which will make your life easier.
In brief, photography can be distinguished in a number of categories:
When you are planning to do a lot of indoor photography like shooting events mostly arranged indoors. Under this category you will mostly be shooting photos inside your premises, wedding halls, party halls, etc.
- You will be using external flash units a lot.
- You might have to shoot in no flash zones for which you will have to switch to high ISO settings.
- Due to dark conditions you will have to switch to lower shutter speed thus making an impact on the image quality due to hand shake i.e. Image stabilization.
- For image stabilization you will also have to have a tripod.
This is almost close to an indoor photography category and you will be mostly shooting stars, moon, city lights, fireworks, etc. under dark conditions.
- Again you will be using external flash units with longer range a lot.
- You will be looking to shoot images with the lowest possible noise/ grains with highest possible ISO settings.
- Due to dark conditions you will have to switch to lower shutter speed thus making an impact on the image quality due to hand shake i.e. Image stabilization.
- For fireworks you cannot afford even a little bit of shake which can be caused due to shutter release button. Under this scenario a remote shutter release will do a great job.
- Adding to image stabilization you will also have to have a tripod or at least a monopod.
Under this category you will mostly be capturing peoples’ faces. You will be interacting with the people surrounding you noticing and finally capturing their facial expressions on your camera.
- Since the importance here will be the facial expressions, you will be shooting with a shallow depth of field, capturing only and only the face and partial body. You will be ignoring out the surroundings or any other objects which distracts the viewer. Here comes the aperture or the f-stops. This is basically considered when you are buying a lens but DSLR body is nothing without a lens I guess J
- Even a little shake in your camera can blur out sharp little expressions on you subject’s face. You will have to activate Image Stabilization to overcome this.
- If you are a person who doesn’t like to do post production stuff then you will probably like the inbuilt feature to apply different filters to your capture picture like Monochrome, Fisheye, Glow, etc. In fact these days DSLRs have an option to enhance color, contrast or even reflection from bright objects. In my case I love doing post production stuff using Adobe Photo Elements or even Google’s Picasa tool.
- Some times after taking a shot you also want to review the captures image and believe me a big 3.5 inches live view (LCD) will make a great positive difference.
If you are a sport lover I am sure you will love to capture those moments when a soccer player is jumping while giving cheers after winning a game. You will surely want to freeze that moment when the player is in air with a great winning expression and body language.
- Sports here depict the speed of events, you will curse yourself on missing even a single act, and you would take a burst of shots with highest number of frames per second.
- You will be capturing each and every action of the player by lowering down the shutter speed to its limits.
- Since you will be shooting a burst of images, your camera should have a huge buffer to hold and process the image before saving it to the media.
- Players during a sport often change their position and it would be great if your camera could allow you to focus manually to a multi focusing points.
I am a person who believes in the power of little ones. I love to shoot insects, wild flower, rain droplets on ivy, and many other small subjects. If you are the kind of person who wants to capture that little beauty then you are a macro photographer.
- You will be reaching out to that honey bee resting on a sun flower to capture its smile J for this you will either be buying expensive macro lenses or adapters to convert your regular lenses to a macro one. Your camera should adapt to not only the previous generation lenses but also the adapters and lenses available by the third party like Sigma. This is called Camera adaptability.
- Shooting at extremely close distance can make your hands to shake and thus resulting to a blurry image. Activating the Image stabilization feature will surely make a big impact.
- Your body might have to go against ergonomic rules but it would be better for your body and of course camera to be equipped with a big LCD Screen to have live view action without leaning yourself below the ground level J
- At such an extreme closeness your external flash unit mounted on hot shoe might not work. It would be great if you could set it on remote flash mode and place it aside pointing in the direction of the subject.
If you love those huge green mountains with human less spots, or you travel a lot with fully equipped photo gears then you are in right section.
- Based on the scenes you will often change your lenses thus risking your cameras optics to expose dust. Now-a-days most of the DSLRs are coming equipped with dust removal feature. You have an option to set the dust removal at startup or at the time of shutting down or even both.
- Working outside in extreme weather might harm your lenses, it would be better to buy precautionary filters beforehand.
- Carrying a lot of weight in the form of camera, lens kit, tripod makes huge impact while you are travelling. A light weight camera and its adaptable accessories will work like a blessing.
- As I said earlier to eliminate hand shake blurs and avoiding image ruins your camera must have an Image Stabilization feature.
- You will be shooting far off distances to capture that little log wood hut at the top of uphill. To shoot these subjects it would better equipped with an extended dynamic range.
- Again to avoid post production processing it would be better to have inbuilt feature to apply filters and enhance true colors.
So you are fully equipped with a studio and a variety of lights. You must be having a huge collection of fixed lights and remote flashes, reflectors, etc. Along with Image Stabilization, live view, inbuilt color enhancing features your camera must support all those bunch of lighting accessories.
|
|
Category |
Features |
| 1.1 | Indoor Photography |
|
| 1.2 | Night Photography |
|
| 1.3 | Portrait Photography |
|
| 1.4 | Sports Photography |
|
| 1.5 | Macro Photography |
|
| 1.6 | Outdoor/ Landscape Photography |
|
| 1.7 | Studio Photography |
|
Continued in “Choosing a DSLR (Part-II)”
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aspect Ratio, Auto Focus, Burst Mode, Camera Buffer, Choosing DSLR, Compare DSLR, Continuous Mode, DSLR, DSLR Buffer, Dust Reduction, Flash, FPS, Frames Per Second, Image Sensor, Image Sensor Size, Image Stability, Large Buffer, LCD, Live View, Photography, Photosites, Pixels, Sensor Type, Vibration Reduction, Viefinder
Posted in: Choosing a DSLR , Photography | 2 Comments »
In my previous post “Is it worth upgrading to DSLR? (Part-I)” I wrote about understanding the characteristics, anatomy, Pros and Cons of point-n-shoot camera. In this concluding part I would like to brief out characteristics, anatomy, Pros and Cons of a DSLR. This will help you make a decision to whether or not to upgrade your gear to DSLR.
DSLR stands for Digital Single Lens Reflex. These cameras can be mounted with a variety of lenses like fish eye, wide angle, telephoto, etc. Such a variety of interchangeable lenses provides you with a greater creative control over ability to select lenses based on virtually any photographic situation.
The other major design difference between DSLR and point-and-shoot cameras is that most DSLRs only provide a “through-the-lens” optical viewfinder, although some models such as select Sony α (alpha) DSLRs feature the ability to compose and see a live preview of your shots on the camera’s LCD monitor. For DSLRs that don’t include this feature, you frame the shot by holding the viewfinder up to your eye.


Now that I’ve brief out the pros and cons of DSLRs and Point-n-Shoot Cameras, I leave you to make your best decision to upgrade or not. In my next post I’ll post a very important entry, which will help you choosing a good DSLR Camera.
Hope you enjoyed this post of mine.
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aperture, Aperture Priority, Auto Mode, blur, Camera, Dark, Depth Of Field, DOF, DSLR, DSLR Characteristics, DSLR Cons, DSLR Pros, Exposure, Flash Unit, Grain, ISO, Landsacpe, LCD, Lens, Live View, monopod, motion, Night, No Flash Zone, Noise, Photographic Film, Photography, Price, Programmed Mode, Protrait, Shutter, Shutter Lag, Stationary, tripod, Weight
Posted in: Photography | 2 Comments »
In Understanding Shooting Modes (Part-I, II and III) I explained some of the auto and advanced modes. I’ll explain other available modes like Portrait, Landscape, Sports, Macro, and Night in this part.
In today’s cameras many other modes exist which I will be briefing out below. Availability and indication of these modes depends upon brand to brand. These modes are basically preprogrammed modes provided by your camera manufacturer.
This mode is mostly represented by a head-and-shoulders icon. It creates a shallow depth-of-field thus throws out the distracting background. Turn the dial to use this mode and your camera will take care of everything else.
This mode is mostly represented by a mountain icon. It produces a maximum depth-of-field allowing lens to capture everything including background. This also produces an overall sharp image. Turn the dial to select this mode and your camera will pick the best settings to capture the scene.
This mode is mostly represented by a flower icon. It activates the camera’s closest focus along with a greatest possible depth-of-field.
This mode is mostly represented by an icon of a person running. Once the shutter release button is pressed, camera automatically chooses a combination of higher shutter speed and aperture to freeze the motion of the object in motion.
This mode is mostly represented by an icon containing a star, a moon and human image. It uses a slow shutter speed to get maximum amount and length of light.
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aperture, Aperture Priority, Auto Mode, Camera, Depth Of Field, DOF, DSLR, EXIF, Exposure, f-stops, f/11, f/2, f/2.8, f/4, f/8, Focal Length, Image Sensor, iris, ISO, Landsacpe, Lens, Macro, motion, Night, Photography, Point-and-shoot, Programmed Mode, Protrait, Shallow Depth-of-field, Shooting Modes, Shutter, Shutter Priority, sports, tripod
Posted in: Photography , Understanding Shooting Modes | 1 Comment »
In Understanding Shooting Modes (Part-I and Part-II) I explained Auto, Programmed and Aperture Priority Mode, I’ll explain and illustrate one of the other advanced modes called Shutter Priority Mode in this part.
This mode lets you choose the shutter speed and the camera chooses the appropriate aperture (lens opening) for proper exposure.
Shutter priority will allow you to control how you capture your subject in motion. This mode is used when you want to increase or decrease the amount of blurring in the picture, the blurring is due to the motion of either the subject or the camera shake.
Visit some waterfall and experiment the following:
Slow Shutter Speed
Result Cameras shutter will allow light to fall on the sensor for 2 Sec, this will blur out the falling water giving it a smooth touch as shown below:

Fast Shutter Speed
Result Cameras shutter will allow light to fall on the sensor for 1/1000th Sec, this will capture the falling water with a great speed thus freezing the motion:

Please leave a comment so as to let me know that this post is at least helping some one
Share this Post[?]
Tags: Aperture, Aperture Priority, Auto Mode, Camera, Depth Of Field, DOF, DSLR, EXIF, Exposure, f-stops, f/11, f/2, f/2.8, f/4, f/8, Focal Length, Image Sensor, iris, ISO, Landsacpe, Lens, Macro, motion, Night, Photography, Point-and-shoot, Programmed Mode, Protrait, Shallow Depth-of-field, Shooting Modes, Shutter, Shutter Priority, sports, tripod
Posted in: Photography , Understanding Shooting Modes | 1 Comment »
In continuation to Understanding Shooting Modes (Part-I) where I described the Auto and Programmed Modes, I’ll explain and illustrate one of the advanced modes called Aperture Priority Mode in this part.
This mode lets you choose the aperture (lens opening) and the camera chooses the appropriate shutter speed for proper exposure.
Just like human’s eyes, lens of a camera has an opening called iris that opens and closes according to automatic or manual settings. This in optical terms also referred as “Aperture”. Changing the aperture settings changes the size of the opening which controls the amount of light the lens passes through to the image sensor.
This mode is used when you want to have control over depth-of-field. This is measured in f-stops i.e. f/1.4, f/1.8, etc. Higher f-stop numbers indicate smaller aperture and vice-versa.
The “f-number” is the ratio of distance from the sensor/ film to the optical center of the lens in your camera. When you buy a lens for your camera, it will have a number on it, something like 18mm, 55mm, 105mm, etc. These numbers are called as focal length.
To put all of this simple, when the aperture of a 200mm lens (focal length) is 50 mm (aperture opening) wide, your f-stop will be f/4, because the ratio of 200/50 equals four. If you “stop down” your aperture to half that size – 25 mm wide – your f-stop will be f/8. (200 divided by 25.) So the “f-number” gets larger as you let in less light.
Depth-of-Field is the distance between the closest sharply focused object to the lens and the farthest sharply focused object from the lens. Large apertures (lower f-stop) create shallow depth-of-field and the smaller apertures (higher f-stop) create greater depth of field.
This is a bit confusing. But I learned it using an example of 10 trees standing in a row. Lower f-stops will capture lower number of trees and higher f-stop will capture more numbers of trees.
| More Light << | f/2 | f/2.8 | f/4 | f/5.6 | f/8 | f/11 | >> Less Light |
Visit some nearby garden where you can locate a flower and experiment the following:
Shallow Depth-of-Field
Result The lower f number will generate a shallow depth of field, thus focusing only the flower, not the background.

Greater Depth-of-Field
Result The higher f number will generate a larger depth of field, thus focusing everything along with the background.

Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aperture, Aperture Priority, Auto Mode, Camera, Depth Of Field, DOF, DSLR, EXIF, Exposure, f-stops, f/11, f/2, f/2.8, f/4, f/8, Focal Length, Image Sensor, iris, ISO, Landsacpe, Lens, Macro, motion, Night, Photography, Point-and-shoot, Programmed Mode, Protrait, Shallow Depth-of-field, Shooting Modes, Shutter, Shutter Priority, sports, tripod
Posted in: Photography , Understanding Shooting Modes | 2 Comments »
Today’s advance digital cameras basically perform automatically many of the tasks necessary for capturing a photo. The Auto mode or the Programmed mode is always a good option for beginners to shoot any scene. However, these modes don’t always produce up to the mark results. If you really want to utilize the power of your DSLR, you must learn and practice all the available modes.
Before discussing any of the available modes, we should understand exposure. Exposure is basically amount of light allowed to fall on photographic film (in case of a film SLR) or on image sensor (in case of a DSLR). The amount of light in a camera is controlled by setting the combination of Aperture and Shutter.
In Auto mode, it’s the camera that makes decision on what amount of light is allowed to fall on the sensor. Today’s digital cameras are intelligent enough to run their own algorithms to attain a best calculated aperture and shutter speed combination based on the projected scene. You don’t have to do anything more than to press the shutter release button. This method is also referred to as the “Point-and-shoot mode”.
Some cameras let you preprogram a number of settings like ISO, quality, white balance, aperture or shutter. These settings can be saved in a programmed folder which can be used later. Today’s cameras have prebuilt programmed modes based on the situation, you just have to turn the mode dial to the programmed settings and that is it.
Using these modes cut shorts the time it takes for you to set the camera’s settings. Based on the ideal situation and available auto/programmed modes, you just turn the dial and press the shutter release button.
I used these modes when I was a beginner because after shooting l could compare the EXIF data and learned what settings did camera chose based on the projected scene. So, go ahead with these modes only if you are a beginner and study each and every setting that camera opted for the scene. In my public gallery at www.tweakdynamix.com, you can view EXIF data for each of the photos that I took.
Well; these are the quickest mode to shoot. Just turn the mode dial to Auto/ Programmed mode based on the scene and press the shutter release button. The camera will use its sensors to make its best guess at most suited f-stop and shutter speed required for a good exposure.
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Aperture, Aperture Priority, Auto Mode, Camera, Depth Of Field, DOF, DSLR, EXIF, Exposure, f-stops, f/11, f/2, f/2.8, f/4, f/8, Focal Length, Image Sensor, iris, ISO, Landsacpe, Lens, Macro, motion, Night, Photography, Point-and-shoot, Programmed Mode, Protrait, Shallow Depth-of-field, Shooting Modes, Shutter, Shutter Priority, sports, tripod
Posted in: Understanding Shooting Modes | No Comments »
In traditional film photography terms ISO indicates sensitivity of a photographic negative film to light. It is measured in numbers i.e. 200, 400, 800, etc. The lower numbers indicate lower sensitivity of the film with finer quality in the pictures.
In Digital Photography terms ISO indicates sensitivity of the image sensor to light. The concept remains the same i.e. lower the number the less sensitive your camera’s sensor is to light along with a finer quality of the pictures taken. Higher numbers like 800, 1000, 3200 are generally used in dark/ nightly conditions to attain faster shutter speeds. Higher ISO results in grainy/ noisy pictures.
Picture ISO1 is an example that I recently shot in one of the indoor gardens in DC. The left picture has been shot with lower ISO of 200 and the right one has been shot with higher ISO of 1600.
The difference is noticeable. Left picture with ISO 200 has a fine quality as compared to the right which was shot with ISO 1600.
ISO Speed & Exposure
ISO speed affects the shutter speed/ aperture combination you can use to obtain correct exposure.
In darker situations you will probably use the on-board or external flash but if that is not allowed then you would need to use a higher ISO. There are basically two ways of handling ISO:
- Set on “ISO Auto” mode, your intelligent digital camera will run some algorithms and automatically select a higher ISO based on the lighting conditions.
- Manually select the next higher ISO and see if the increased sensitivity allows you to obtain a correctly exposed picture. If it does, you can now take a correctly exposed picture.
When you manually choose a specific ISO you’ll notice that it impacts the shutter speed and aperture needed for a well exposed shot. Suppose you raised your ISO up from 100 to 400 you’ll notice that you can shoot at higher shutter speeds and/or smaller apertures.
Choosing ISO
Choosing ISO settings basically depend upon following factors and you should consider these before setting your camera’s ISO:
If the subject is well lit, I want fine quality, my subject is not in motion and I have a tripod- I will opt for lower ISO (may be 100 or 200).
However if it is dark, the subject is so important that I don’t care about noise/ grain in my picture, I don’t have time to set up my tripod because I want to shoot a moving subject- I might consider increasing the ISO to 400 or 800. This will allow me to shoot at faster speed and still expose the shot well. d still expose the shot well.
Where to choose higher ISO?
Please leave a comment so as to let me know that this post is at least helping some one
Tags: Camera, Dark, DSLR, Exposure, Grain, ISO, motion, No Flash Zone, Noise, Photographic Film, Photography, Point-and-shoot, Protrait, Stationary, tripod
Posted in: ISO | No Comments »